1. Leakage
Leakage is one of the most common problems with hoses in twin-tub washing machines. Over time, hoses may develop cracks due to wear, aging or environmental factors, leading to leaks. Leakage not only affects the normal use of the washing machine, but can also cause serious damage to the surrounding floor and furniture, and even cause mold growth. When a leak is discovered, it is crucial to promptly check the various connection points and the entire length of the hose to look for cracks or loose areas. If a leak is found, the best solution is to replace the damaged hose immediately. Regular inspection of the hose can help detect problems early, so as to avoid serious damage. To reduce the risk of leaks, it is recommended to carefully inspect the hose before using the washing machine to ensure that all connections are tight and there are no signs of wear.

2. Blockage
Blockage problems usually occur in the water inlet or drain hoses of twin-tub washing machines. Over time, debris such as dirt, lint, detergent residue, etc. may accumulate on the inner wall of the hose, causing water flow to be blocked. This not only causes the washing machine to not work properly, but may also cause water to flow back, affecting the washing effect. To avoid blockages, it is recommended to clean the hose regularly, especially if the washing machine is used frequently. If you suspect a hose is clogged, you can remove it from the washing machine and rinse it out with water. You can use a special cleaner or a natural vinegar and baking soda mixture to help clean up the buildup. Make sure to check the filter and water inlet regularly to ensure that there is no debris blocking the water flow.

3. Distortion and twisting
Hoses are prone to distortion and twisting during installation and use, especially if they are not laid out properly. Twisted hoses can restrict water flow, resulting in poor washing results and even affecting the drainage function of the washing machine. To prevent hose distortion, ensure that the hose is laid in a straight path and avoid sharp turns or compression. You can use cable ties or clamps to fix the hose to the wall to keep it running straight. Check the condition of the hose regularly to ensure that there are no twists or compressions, and try to avoid dragging or squeezing the hose during use to keep it in optimal condition.

4. Improper installation
If the hose is not installed correctly, it can cause a variety of problems, such as leaks, incomplete washing, or poor water supply. Make sure to install it according to the instructions provided by the manufacturer, especially when connecting the hose to the water source. The connection point should be tight, but avoid over-tightening to avoid damaging the hose. If you are unsure about the installation steps, it is recommended to check the user manual or consult a professional. After the installation is completed, check the connection points to ensure that there are no leaks and make necessary adjustments. When installing the hose, be careful to ensure that the hose is not twisted or bent to ensure smooth water flow.

5. Aging and wear
The hose of a twin-tub washing machine will naturally age over time, especially under the influence of high temperature, direct sunlight and chemicals, the material may become brittle. Aging hoses are not only prone to leaks, but may also cause poor water flow. Therefore, it is very important to regularly check the condition of the hose and look for cracks, discoloration or other signs of aging. To reduce the risk of failure, it is recommended to replace the hose every few years or replace it in time when obvious signs of aging are found. Proper maintenance and timely replacement can ensure that the washing machine operates in optimal condition and avoid unexpected losses caused by hose failure.

6. Incompatible hoses
The use of incompatible hoses may cause a variety of problems, including leaks or poor function. Different models of washing machines have specific requirements for the size and type of hoses, and the use of hoses that do not meet the standards will affect the efficiency and safety of the equipment. When purchasing replacement hoses, be sure to choose products that match the model of the washing machine and ensure that they meet the manufacturer's regulations. Using the right hose will not only make your washing machine work more efficiently, but it will also reduce the risk of malfunctions. If you are unsure of the right model, you can refer to your owner's manual or consult a professional to ensure that the replacement part you purchase will perfectly match your washing machine and ensure it works properly.